Fountain Nozzle

 Geyser jet nozzle produce an output fountain jet that combines a mixture of water from the immersed pump, water from the pond and air.  The end jet pattern is a column of white water, created by mixing air and water together. Because water is drawn from the fountain pond, a pre-determined length of the outlet pipe must remain submerged . 

It is important that this level of water is maintained to ensure the performance levels given in the chart. They are equipped with tilt correctors to prevent unwanted jet inclination. The smaller sized geyser jet nozzles (1/2" and 1") are made of 100% cast and machined brass, while the larger sizes (1½”, 2, 2½" and 3”) are a mixture of stainless steel and brass.

Ice Tower Fountain Nozzle

                                

This quality brass fountain nozzle is commonly called an Ice Tower Fountain Nozzle which produces a thick, frothy column of water. The nozzle is mounted on the top of a guide tube and flushed with the water level. This is a water-level dependent nozzle so you need a constant water level and need to adjust the nozzle so it is correctly positioned to allow for the venturi effect to add air into the rising geyser. The giant water column has a strong wind resistance which makes it widely used in square or public places.

The installation will only require PVC pipe and fittings to attach it to a submersible pump. Performance is directly affected by the pumps flow rate so a higher LPH will give higher and wider spray patterns.